CMC Cook Mfg PT-130 Electric Hydraulic Tilt & Trim with or without gauges.

INFO LINE 1-866-864-8480

All prices in Canadian Dollars

	Three Years Free
	Barbeques
	Bilge Heaters
	Canoes
	Dinghies
	Dock Lights
	Docking System
	Fishing Boats
	Heaters
	Inflatable Boats
	Inflatable Kayaks
	PaddleSki Kayaks
	Kayaks
	Jack Plates
	Pedal Boats
	Propellers
	Stoves
	Stovetops
	Smart Tabs
	Tilt & Trim
	Trailers
	Trim Tabs
	Wakeboard Tower

PT-130 Electric Hydraulic
Tilt & Trim
For smaller engines click here for the PT-35
Also see accessories
Set Back Plates

90 Degrees Of Tilt And Trim !

Experience Convenience & Improved Performance

The PT-130 Tilt & Trim incorporates a 6" setback which enhances Boat Stability and enables the prop to get a better "bite" at a higher prop setting. With the touch of a switch you can raise your motor to protect your prop from damage and your back from strain. The PT-130 Tilt & Trim has 20 degrees of trim and 90 degrees of trim and tilt. It allows to tuck your motor in to get your boat on plane smoother and faster. When you're underway, you can change the angle of your motor to obtain the best performance for your load and water conditions. It gives you a more stable ride, increases top end speed, allows more prop clearance, and better fuel economy.

Superior Construction

The PT-130 Tilt and Trim, is a computer aided design, our commitment to quality and manufacturing excellence is evident in every product we make. The PT- 130 is constructed of 1/2" 6061 T6 alloy aluminum extrusions and fastened with stainless steel fasteners for maximum strength and durability. No molded aluminum which has less resistance to stress. This system is made of 100% non-ferrous material which makes it impervious to saltwater and freshwater.

Most Powerful On The Market

The PT-130 is actuated with a totally waterproof marine electric hydraulic System that is rated OVER 7800 lbs. OF THRUST! Over 40% more powerful than other brands. It is also more impervious to saltwater and freshwater than others because it is made of 100% non ferrous materials. Our hydraulic system is completely sealed and submersible and runs without worry of water damage. No electromechanical ball screw !

Ideal For Any Type Of Boat

The PT-130 will fit on virtually any type of boat and outboard motor. The PT-130 along with the optional trim gauge makes it very easy to know the exact angle of your motor. It's especially convenient on pontoon boats. Rated for 10H.P. through 130H.P. motors, it fits standard B.I.A. bolt pattern motors without drilling holes. A convenient adapter kit is available for motors that are mounted with transom clamps.

*Mounting Hardware Included With Every PT-130
Specifications

*** FREIGHT IS AN ESTIMATE

Ships from the USA. Brokerage charge is extra.

Also Click here if your engine is 35HP or less

Transom Spacer for Pontoon Boat (#13032)

The Transom on some pontoon boats are inset with an aluminum lip along the sides. To conveniently mount the PT-130 to this type transom, this transom spacer is available. The transom spacers are 1" thick allowing you to mount the PT130 without interference with the 1/2" to 3/4" lip around the transom on some pontoon boats.

Transom Clamp Motor Adapter (#13022)

For installation of motors mounted with transom clamps, an adapter kit is available from CMC. This adapter kit is made for quick and easy installation of these type motors. The photo above shows this adapter on a PT130 with a transom clamp motor.

For technical help contact the Help Desk
Return policy: There is a 15% restocking fee on returned items.
Our original freight costs are also not refundable.
Mounted Units are NOT Returnable

This website is owned and operated by
Boat Owner's World, Inc
and is not affiliated with any other company or organization

Prices subject to change without notice.

Copyright © 1996-2009
Boat Owner's World, Inc.
All rights reserved.